The ACEiT additive dispenser is a highly specialized unit engineered/designed with user friendliness in mind. It emulsifies the dry powder ACEiT additive while dispensing prescribed rates to the plant mixing chamber. It is capable of dispensing the material into a pug-mill (continuous mixing plant) or into a repeat-batch concrete plant (twin-shaft or paving plant)

  • Modular Design – For ease of moving with fork pockets and ‘D’ ring lift lugs built onto the unit.
  • Easy to Deploy – Self-contained with cam-lock fittings for discharge line, Snap-On fittings for high pressure water out, garden hose fitting for water in, and a 50’ electrical cord for attaching 440 volt/3-phase/20-amp electric power.
  • Computerized Controls – The unit is outfitted with a Rice Lake 920i control unit that can be set to produce varying quantities per minute and can be remotely interfaced to the concrete plant batch computer.
  • Low Water Consumption – Maximum water usage is 1 ½ gallons of water per minute during operation.
  • Large Capacity Storage Hopper – Is capable of holding 1,000 pounds of ACEiT additive which would translate into 2,000 tons of ACEiT (CCP) Compacted Concrete Pavement.
  • Easy to Clean and Maintain – Unit can be blown off with an air hose or use the on-board 1,500 psi high-pressure pump with Snap-On hose and line attachment.
  • Variable Out-Put Rate – Unit can be adjusted to dispense a required dosage into a continuous mixing plant regardless of desired tons per hour.
  • Control Alerts – Unit will alert operator when it is time to refill hopper
  • Totally Enclosed – The unit is totally enclosed with removable panels to keep the internal machinery clean and protected from the elements.
  • Sealed Charge Hopper – ACEiT additive is extremely hydrophilic, so the hydraulic assist rams on the lid hinges provide the unit with water tight storage of material in between use